InovaAir E20 Plus – Air Purifier

$1,695.00

The Ultimate Home Air Purifier for serious dust, chemical and allergen removal.

Out of stock

Category:

Description

The InovaAir E20 Plus

INDUSTRIAL GRADE Air Purifier For Home & Office

If you suffer from allergies, asthma, a respiratory condition or are concerned about air pollutants in your home, office or commercial environment, InovaAir offers a powerful air purifying solution for you.

InovaAir manufacture air purifiers intended to meet individual requirements and exceed expectations. With customisable high performance filters capable of removing a wide variety of airborne particles, allergens and chemical pollutants.

What do InovaAir Air Purifiers remove from the air?

  • Dust Mites
  • Mould spores
  • Pet Allergens
  • Chemicals (Volatile Organic Compounds)
  • Pollens from grasses, weeds, flowers and trees.
  • Smoke
  • Odours
  • Bacteria, Viruses

How can an Air Purifier help me in controlling my allergies?

Using an air purifier is one of the most effective ways to reduce exposure to airborne dust and allergens. An InovaAir Air Purifier will allow you to breathe air free of dust, allergens and pollutants. InovaAir air purifiers are portable allowing them to be used in the bedroom at night and in your living area during the day.

If you are considering buying an Air Purifier make sure it has a Medical-Grade HEPA Filter (High Efficiency Particle Arrestance).

Most people purchase air purifiers to remove dust and allergens from the air and want the highest level of efficiency available. Medical-grade HEPA filters offer the highest level of efficiency: a minimum capture of 99.97% of particles at 0.3 microns in size and larger. With 1 micron measuring just 1/10,000 of a centimetre HEPA filters will remove dust mites, mould spores, pet allergens, pollens and ultra fine particles from the air.

Medical-grade HEPA filers are made from a very fine paper (not polypropylene or synthetic materials) which traps microscopic particles so fine they will even remove bacteria and viruses. This is why HEPA filters are used in hospital and medical applications, including operating theatres.

With the rise in popularity of HEPA vacuum cleaners and air purifiers, many manufacturers are claiming to use HEPA filters, however the majority of these are not Medical-grade and when tested, fail to filter 99.97% @ 0.3 microns of particles from the air. If you suffer from allergies or asthma it is critical to use an air purifier with a medical-grade HEPA filter.

See below for further information on how to tell if an Air Purifier has a Medical-grade HEPA filter.

The InovaAir Difference

  • The highest quality and most durable air purifier available
  • Powder coated Steel Construction blends well with any décor (will not age, fade, crack or deteriorate like plastic)
  • Steel Filter Casings (no cardboard, plastic or foam used which is susceptible to air leaks)
  • InovaAir Only Uses Scientifically Proven Air Filtering Technologies (ioniser-free and do not produce ozone)
  • Highly Energy Efficient -less than a cent an hour to operate
  • Made for 24 hour, quiet, continuous operation
  • 3 Year Warranty (warranty unaffected by filter changes)
  • The only air purifier fully Australian Made and Owned

E20Plus Filter Set

Note: The E20-Plus includes the additional final stage 6kg carbon filter (for applications requiring heavy duty chemical & odour removal). Excellent for removing pollution from main roads, smoke and mycotoxins produced by mould spores.

Advantages

  • Certified medical-grade HEPA filtration 99.97% @ 0.3 microns.
  • High airflow quickly reduces ambient dust, allergens and chemical pollutants.
  • Plastic-free, chemical-free all steel powder coated construction.
  • EC Fan offering class leading energy consumption (6 watts @ 120m3/ hour).
  • Chemical Plus models available with 6 or 10 kilogram coconut based activated carbon filters for highest chemical removal.
  • High-FlowTM air diffuser with silencer for ultra quiet operation.
  • Main filter life between 3-5 years for low running cost.

Applications

  • Effective in large areas up to 100m2, suitable for smaller areas such as bedrooms or offices requiring a high level of air purification.
  • Highly effective in removing dust, allergens, mould spores and musty odours.
  • Situations involving chemical off-gassing from new furnishings, pollution from main roads and odours.
  • Portability, easily moved from room to room on wheels.

Flexible area coverage

The InovaAir E20 air purifier is flexible in operation and can be used in either single or multiple rooms or the entire home or office.

H13 HEPA high efficiency filtration

The filter in the InovaAir E20 system is manufactured using H13 medical- grade HEPA filtration with an incredible 6.4m2 surface area, combined with Technostat® pre-filtration microporous filter technology these filters exceed HEPA filtration standards. Normally only found in commercial environments such as hospitals and cleanrooms. These E20 filters provide the highest level of filtration available.

Green Choice Filters

Large filters not only result in superior filtration and airflow, they also result in:

  • lower energy consumption
  • longer filter life
  • Lower cost over time

 

E20 Air Purifier In Room

Testimonials

The Wilson Family Story
Watch the difference InovaAir made to this little girl’s allergies and life.

Ezra’s Story
How Ezra’s sleep improved using an InovaAir AirClean E20 Air Purifier.

Rod Marshdale explains his experiences with Cystic Fibrosis and Molds.

Poduct Videos

The E20 Features
See what makes the E20 Australia’s leading air purifier.

Production
See the attention to detail which goes into
every InovaAir Air Purifier.


 

WHAT IS A MEDICAL GRADE HEPA FILTER?

HEPA filters known as High-Efficiency Particulate Arrestance filters were originally developed to filter fine radioactive particles. A HEPA filter will filter with a minimum efficiency 99.97% of particles 0.3 microns and 95% of particles 0.1 microns. With 1 micron measuring just 1/10,000 of a centrimetre and the smallest particle visible to the naked eye being 40 microns. 0.3 microns is many times smaller than dust mites, mould spores, pet allergens and pollens. HEPA filters are widely used in medical applications including: cleanrooms, pharmaceutical manufacturing and any environment where clean or sterile conditions are required.Hepa Filter Diagram

Medical grade HEPA filters are made from highly efficient filter paper. The paper is folded in a concertina configuration to maximise the surface area of the filter and allow air to flow through with minimal resistance. There is a certain ratio of filter paper to airflow volume which must be followed in the construction of the filter to achieve the 99.97% efficiency rating. If there is not enough filter paper, efficiency will not be to HEPA standards.

How are HEPA filters made?

The filter paper is bonded airtight inside a filter casing made from steel. HEPA filters are delicate, they cannot be vacuumed or cleaned but due to the considerable surface area of the filter paper they will generally last 3 years or more when used with proper pre-filtration. HEPA filters must also have an airtight seal or gasket on the external face to prevent air from bypassing around the filter.

Air bypass is a common problem with air purifiers, where due to lack of a proper seal or filters are made from less than ideal sealing materials such as cardboard, paper or plastic, air bypasses around the filter resulting in efficiency being a fraction of the stated 99.97%. All InovaAir HEPA air purifiers are factory certified to filter 99.97% @ 0.3 microns efficiency.

NB: Most residential HEPA air purifiers sold in Australia do not conform to medical grade HEPA standards. There is no regulatory authority which monitors claims by manufacturers that HEPA filters sold in either vacuum cleaners or air purifiers are actually 99.97% efficient.

InovaAir offers ACTUAL 99.97% (Medical Grade) efficiency @ 0.3 microns.
While the majority of HEPA filters in home air purifiers on the market claim 99.97% efficiency – few achieve this because filters fail to seal properly and are not built to Medical Grade HEPA standards. Filters constructed from cardboard, plastic or polystyrene foam most commonly allow air to bypass around the filter because they do not have the structural integrity to create an airtight seal with a gasket. In keeping with Medical Grade standards, InovaAir only uses steel in the filter housing construction.

Ongoing Filter Replacement Costs:

ProductLifePrice
Pre-filter6 months$50
H13 Medical-grade HEPA filter5 years$295
Optional 6kg carbon filter5 years$195

Note: Filter replacement intervals are based on continuous use.
Filter life will vary depending on what dust & chemical concentrations are present in the environment.

For replacement, filters are easily accessed by simply unlatching stainless steel latches and removing the top of the system.

Key Features:

PARTICLE, DUST & ALLERGEN FILTRATION:
Large initial stage wrap-around pre-filter over 1 meter in length (can be washed or vacuumed)
– 360° intake cylindrical Medical Grade HEPA filter: actual 99.97% efficiency @ 0.3 microns. Efficient to 0.1 microns. Surface area 5.5m2 with service life of approx. 5 years.
– Filter housings constructed from steel (and free from cardboard, plastic or polystyrene foam).
CHEMICAL, ODOUR AND GAS FILTRATION:
6kg activated carbon filter for the most effective removal of volatile organic compounds (VOCs). The large quantity of activated carbon results in high efficiency removal of VOCs, smoke, odours and chemical pollutants.
QUIET OPERATION:
High quality centrifugal fan motor designed for quiet continuous 24 hour operation and energy efficiency.
FILTER ACCESS:
Stainless steel latches on either side of the air purifier simply unlatch to allow quick and easy filter changes.
ENERGY CONSUMPTION:
Speed 1: 28 Watts; Speed 2: 45 Watts; Speed 3: 85 Watts.
AIR DELIVERY:
Speed 1: 80m3 per hour, Speed 2: 150m3/h, Speed 3: 500m3/h.
COVERAGE AREA:
Filters areas up to 100m2.
CONSTRUCTION:
Precision fabricated from Australian zinc coated steel.
FINISH:
Durable and non-toxic attractive light grey semi-gloss powder coat.
AIR FLOW:
High-Flow™ air diffuser on the front of the air purifier creates a unique filtered airflow pattern, preventing air from being re-filtered before supplying the entire room. The air intake at the rear of the E20 draws polluted air from close to ground level and allows the user to direct the clean air to a particular area.
PORTABLE:
Castors allow for portability around the home. For ease of transportation the filter can be removed in seconds.
WEIGHT:
25.5 kg (fully assembled) 15.5 kg (without filters).
DIMENSIONS:
427mm (d) x 411 (w) x 600mm (h).

*Technical specifications may be subject to change without prior notice

Package Includes:

– E20 Unit
– Power Cable
– Manual
– 3 Year HEPA Filter
– 3 Year 6kg Carbon Block Filter

Warranty:

– Full 3 years parts and labour (excluding consumables).

Note: some manufacturers of air purifiers void the warranty if a customer does not replace filters at specified intervals (regardless of use). InovaAir’s warranty is not dependent on filter changes.